6 m Indoor LED Sphere — P1.5 to P5
ISP-6000-P4 · Spherical LED Display

6 m LED Sphere Display, Indoor

6 m shell with 7 pitch options from P1.5 to P5, 11,101,472 pixels at P4 and 90.5 kW maximum draw.

Diameter6,000 mm
Pixel pitchP4 (7 options)
Resolution4,712 × 2,356 px
Brightness≥ 600 nits
Max power90.5 kW
Weight, est.1.5 t

What you get with this model

  • Every cabinet is cut for the 6,000 mm shell — the latitude bands, the truncations at top and bottom and the cable exits are tooled for this one diameter
  • 11,101,472 pixels run as a single 2:1 canvas, so a stock equirectangular video maps without re-cutting
  • Front-service modules on magnetic carriers: one dead module comes off with a suction tool, no need to open the shell or hire a lift
  • Load ring, three-point rigging and a stamped connection detail are included in the drawing package
  • Max draw is 90.5 kW at 800 W/m² — we size the distribution board and the cable runs from this figure, not from a rule of thumb

Six metres is usually a landmark for a plaza, a stadium concourse or a casino entrance. At this size we build in a permanent access catwalk inside the shell so modules can be swapped without scaffolding.

Pitch matrix

Every pitch available at 6,000 mm

Same shell, different module. The resolution and the price both move with the pitch — this table is the fastest way to see what you are choosing between.

Pixel pitchResolution (equator × meridian)Total pixelsBrightnessBest viewMax power / m²
P1.512,566 × 6,28378,952,178≥ 600 nits≥ 1.5 m800 W/m²
P1.810,472 × 5,23654,831,392≥ 600 nits≥ 1.8 m800 W/m²
P29,425 × 4,71344,420,025≥ 600 nits≥ 2 m800 W/m²
P2.57,540 × 3,77028,425,800≥ 600 nits≥ 2.5 m800 W/m²
P36,283 × 3,14219,741,186≥ 600 nits≥ 3 m800 W/m²
P44,712 × 2,35611,101,472≥ 600 nits≥ 4 m800 W/m²
P53,770 × 1,8857,106,450≥ 600 nits≥ 5 m800 W/m²
Technical data

Specifications

Figures are for the stock configuration. Values change with size, pitch and environment — the quotation carries the final numbers.

ModelISP-6000-P4
ShapeFull sphere, 360° × 180°
Diameter6,000 mm
Pixel pitchP4 mm (P1.5–P5 available)
LED moduleIndoor shaped module
Resolution4,712 × 2,356 px (2:1 equirectangular)
Total pixels11,101,472
Module structureDriver on board
Module sizeCustom cut to latitude band
LED packageSMD2020
Brightness≥ 600 nits
Brightness uniformity>0.95
Refresh rate3,840 Hz
Grey scale14–16 bit per channel (R/G/B)
Colour depth439.8 billion colours
Frame rate≥ 60 fps
Dimming256 levels, manual / auto
Viewing angle140±10° H / 140±10° V
Best viewing distance≥ 4 m
Max power90.5 kW (800 W/m²)
Average power30.2 kW
Surface area113.10 m²
Weight, estimated1.5 t including shell
IP ratingIP43
Operating temperature-20 to 40 °C
Operating humidity10–65 % RH
Lifespan≥ 100,000 h
Dead pixel rate<0.0001
ControlNovastar / Colorlight, DVI or HDMI in
Warranty3 years, modules and drivers
Application

Where this one works

Same build, different mounting and content depending on the venue. Tell us the site and we adjust the structure and the pixel map.

Airport and transport hub
Casino and entertainment venue
Corporate HQ atrium
Stadium concourse
FAQ

Practical questions

What resolution does a 6 m sphere give at P4?
4,712 × 2,356 px, about 11,101,472 pixels in total. The horizontal count is the circumference (18.85 m) divided by 4 mm; the vertical count is half that, because a sphere maps as a 2:1 equirectangular image.
How much does a 6 m LED sphere weigh?
Around 1.5 t for the screen and shell together, assuming 13 kg per m² of surface. That is an estimate for early structural conversations — the final figure comes from the shell design and we issue it with the drawing set.
Can it be built in a different diameter?
Yes. Anything from 0.8 m to 20 m is quoted from a drawing; the sizes on this page are the ones with existing tooling, which is why they are cheaper and faster. An odd diameter means a new mould set, and that shows up as a separate line in the quotation.
Also in this line

Spherical LED Display

Line overview
Made to drawing

Other spherical builds

Any diameter, outline or pitch quoted from your own file. Tooling shown as a separate line so you can see what the shape costs.

Request a quote

Need this in a different size?

Every model on this page is a starting point. Give us the diameter or outline you actually need and we will quote the build.