WEIMEI logoWCIMCI
+86 153 2343 9001 Request a quote
Home/Products

Product catalogue

Creative LED first, conventional flat panels underneath. Every line is built in the same plant, so a sphere and a boardroom wall can share a controller and a spare-parts kit.

Line 01

Spherical LED Display

Line overview

Spheres from 1 m to 20 m, indoor or IP65 outdoor, with every pitch from P1.5 to P10 on the same shell. 137 stock configurations, and any other diameter quoted from a drawing.

Made to drawing

All 21 spherical models

Beyond these stock models, any outline, diameter or pitch is quoted from your file.

See the whole line
Line 02

Shaped LED Display

Line overview

Cubes, cylinders, ribbons, cones, waves — anything that is not a rectangle, cut and tooled to your drawing.

Indoor LED Cube Display — Four to Six Faces
CUB-P2.5-1000

LED Cube Display — Four to Six Faces

Four to six faces of LED on a right-angled carcass, mapped as one canvas so content runs around the corners instead of restarting at each face.

  • 500 / 1,000 / 1,500 mm edge
  • ≥600 nits indoor, ≥5,500 nits outdoor
  • 3,840 Hz
View specifications
Made to drawing

All 9 shaped models

Beyond these stock models, any outline, diameter or pitch is quoted from your file.

See the whole line
Line 03

Custom Creative LED Display

Line overview

When the brief is a sketch on a napkin rather than a datasheet, this is the line that takes it.

Indoor Indoor Mechanical LED Ring
RING-I-P1.8

Indoor Mechanical LED Ring

A ring that opens, tilts and closes while the LED surface keeps running — the motion is the message, and the screen has to survive being driven by motors all day.

  • P1.8
  • 2222 × 2222 px
  • 4,937,284
View specifications
Outdoor IP65
RING-O-P4

IP65 Outdoor Mechanical LED Ring

The same mechanism sealed to IP65 for plazas and building entrances, where the ring becomes the moving part of a façade rather than a piece of interior sculpture.

  • P4
  • 1000 × 1000 px
  • 1,000,000
View specifications
Indoor
DRP-P1.86-1000

LED Water Droplet Screen

A teardrop form that blends a spherical crown into a tapered body — used where the brief asks for water and a sphere reads too geometric.

  • Ø600 – 1,500 mm, height to 2,500 mm
  • ≥600 nits
  • 3,840 Hz
View specifications
Indoor
HED-P1.25-BUST

LED Human Head Screen — Bust Form

A bust-shaped LED form for museums and brand installations, built from small high-density modules because facial curvature will not tolerate a coarse pitch.

  • Bust height 400 – 900 mm
  • ≥600 nits, dimmable to 100
  • 3,840 Hz
View specifications
Indoor LED Tree Screen — Branching Form
TRE-P2-CUSTOM

LED Tree Screen — Branching Form

A steel tree with LED-clad branches, built for atriums and plazas where the brief asks for something organic rather than a screen on a wall.

  • Height 2 – 6 m
  • ≥600 nits indoor, ≥5,500 nits outdoor
  • 3,840 Hz
View specifications
Made to drawing

All 8 creative models

Beyond these stock models, any outline, diameter or pitch is quoted from your file.

See the whole line
Line 04

Outdoor Creative LED Display

Line overview

Shaped screens that survive a coastal monsoon and still look clean at noon.

Outdoor IP65 IP65 Outdoor Shaped LED Sculpture
OUT-P4-IP65

IP65 Outdoor Shaped LED Sculpture

Any outline built for permanent outdoor use — sealed cabinets, drained carcass, galvanised steel and a design that accepts thermal movement instead of cracking at the seam.

  • To drawing, 1 – 12 m
  • ≥5,500 nits, auto-dimming
  • 3,840 Hz
View specifications
Outdoor IP65
OUT-P6.67-MESH

Outdoor Mesh LED Façade — P6.67 to P10

Perforated outdoor panels that let wind and daylight through, used on glass façades where a solid screen would block the windows or overload the structure.

  • Panel 500 / 1,000 mm, to drawing
  • 1,200 to 6,000 nits, auto
  • 3,840 Hz
View specifications
Made to drawing

All 2 outdoor models

Beyond these stock models, any outline, diameter or pitch is quoted from your file.

See the whole line
Line 05

Indoor Fine-Pitch LED Display

Line overview

The supporting act: the flat, seamless, close-viewing panels that sit behind everything else on this site.

Fine Pitch P0.9 COB Fine-Pitch Panel
FP-P0.9-COB

P0.9 COB Fine-Pitch Panel

Flip-chip COB panel for control rooms and boardrooms where the audience sits two metres away and the screen has to survive being touched.

  • 600 × 337.5 mm (16:9)
  • 100 to 800 nits
  • 3,840 Hz
View specifications
Fine Pitch P1.25 COB Fine-Pitch Panel
FP-P1.25-COB

P1.25 COB Fine-Pitch Panel

The default boardroom and control-room pitch — sharp from two metres, and about a third cheaper than P0.9 for the same wall.

  • 600 × 337.5 mm (16:9)
  • 100 to 800 nits
  • 3,840 Hz
View specifications
Fine Pitch P1.86 GOB Fine-Pitch Panel
FP-P1.86-GOB

P1.86 GOB Fine-Pitch Panel

SMD panels with a resin overcoat — the middle option between bare SMD and COB, priced for public spaces where the screen gets touched.

  • 640 × 480 mm
  • 600 to 900 nits
  • 3,840 Hz
View specifications
Indoor P2.5 SMD Indoor Panel
FP-P2.5-SMD

P2.5 SMD Indoor Panel

The value pitch for large indoor walls — good from five metres, cheap per square metre, and serviceable with widely available SMD spares.

  • 640 × 480 mm
  • 800 to 1,200 nits
  • 3,840 Hz
View specifications
Made to drawing

All 4 fine pitch models

Beyond these stock models, any outline, diameter or pitch is quoted from your file.

See the whole line

Nothing here matches the shape?

That is normal. Send the outline and dimensions; we will tell you whether it needs new tooling and what that adds.

Request a quote