Home/Products/Custom Creative LED Display/RING-I-P1.8

RING-I-P1.8 · Custom Creative LED Display

Indoor Mechanical LED Ring — Rotating Ring Screen

A ring that opens, tilts and closes while the LED surface keeps running — the motion is the message, and the screen has to survive being driven by motors all day.

Format	Ring, motorised
Pixel pitch	P1.8
Resolution	2222 × 2222 px
Total pixels	4,937,284
Brightness	≥ 600 nits
IP rating	IP43

Request a quote Download specs

What you get with this model

Ring segments are mechanically independent — the drive, the hinge and the cable chain are designed as one assembly so the LED never takes the load
Resolution is 2222 × 2222 px (4,937,284 pixels) at P1.8, mapped as a cylindrical strip so content loops cleanly around the arc
Slip rings or a cable chain carry power and data through the rotating joint; both are serviceable from the front without dismantling the ring
Indoor build with IP43 modules and a quiet drive — it is normally sited where people stand next to it
Motion profile, speed and dwell time are set in the controller, so the open/close timing can be matched to the content

Rings are quoted with the mechanism, not just the screen — the drive, the hinge geometry and the cable path are what makes or breaks the build.

Technical data

Specifications

Figures are for the stock configuration. Values change with size, pitch and environment — the quotation carries the final numbers.

Model	RING-I-P1.8
Format	Motorised ring, single or double sided
Pixel pitch	P1.8 mm
Resolution	2,222 × 2,222 px
Total pixels	4,937,284
LED module	Indoor shaped module
LED package	SMD1212
Module structure	Driver on board
Brightness	≥ 600 nits
Refresh rate	3,840 Hz

Grey scale	14–16 bit per channel (R/G/B)
Viewing angle	140±10° H / 140±10° V
Best viewing distance	≥ 1.8 m
Max power	1000W/m2
IP rating	IP43
Operating temperature	-20 to 40 °C
Operating humidity	10–65 % RH
Lifespan	≥ 100,000 h
Control	Novastar / Colorlight plus motion controller
Warranty	2 years, mechanism and LED

Application

Where this one works

Same build, different mounting and content depending on the venue. Tell us the site and we adjust the structure and the pixel map.

Mall atrium kinetic feature

Brand launch and stage reveal

Museum kinetic exhibit

Hotel lobby centrepiece

FAQ

Practical questions

Does the screen keep playing while the ring moves?

Yes. Data runs through a slip ring or a cable chain sized for the full travel, so the picture continues through the whole motion cycle rather than cutting to black.

What maintenance does the mechanism need?

Bearings and the drive are rated for continuous duty; we recommend a six-month inspection of the cable chain and a yearly check of the hinge fasteners. Both are accessible from the front.

Also in this line

Custom Creative LED Display

Line overview

Outdoor IP65

RING-O-P4

IP65 Outdoor Mechanical LED Ring

The same mechanism sealed to IP65 for plazas and building entrances, where the ring becomes the moving part of a façade rather than a piece of interior sculpture.

P4
1000 × 1000 px
1,000,000

View specifications

Indoor

DRP-P1.86-1000

LED Water Droplet Screen

A teardrop form that blends a spherical crown into a tapered body — used where the brief asks for water and a sphere reads too geometric.

Ø600 – 1,500 mm, height to 2,500 mm
≥600 nits
3,840 Hz

View specifications

Indoor

HED-P1.25-BUST

LED Human Head Screen — Bust Form

A bust-shaped LED form for museums and brand installations, built from small high-density modules because facial curvature will not tolerate a coarse pitch.

Bust height 400 – 900 mm
≥600 nits, dimmable to 100
3,840 Hz

View specifications

Made to drawing

Other creative builds

Any diameter, outline or pitch quoted from your own file. Tooling shown as a separate line so you can see what the shape costs.

Request a quote

Need this in a different size?

Every model on this page is a starting point. Give us the diameter or outline you actually need and we will quote the build.

Request a quote