LED Cylinder Column — 300 to 1,200 mm
CYL-P2.5-800 · Shaped LED Display

LED Cylinder Column Display

A cylindrical wrap for structural columns and free-standing drums, cut on a constant radius so the seam is one line and the map is a simple loop.

Pixel pitchP1.5 – P3
SizeØ300 – 1,200 mm, height to 6 m
Brightness≥600 nits indoor
Refresh3,840 Hz
ServiceFront, magnetic
Lead time4 to 8 weeks

What you get with this model

  • Modules cut on a single radius, so a 600 mm and an 800 mm column can share tooling — that is where the cost saving comes from
  • Height built in 500 mm bands; the top band is closed with a matching cap ring so no bare frame is visible
  • Content maps as a 360° strip, so any video loops around the column without a visible start point
  • Front-service modules with a magnetic carrier; the column does not need to be unbolted to swap a module
  • Optional acoustic or structural sleeve behind the LED where the column is load-bearing

Cylinders are the workhorse of shaped LED: a shopping centre column, a stage riser, a hotel lobby drum. One mould covers a range of diameters because the modules are cut on a constant radius.

Technical data

Specifications

Figures are for the stock configuration. Values change with size, pitch and environment — the quotation carries the final numbers.

ModelCYL-P2.5-800
Pixel pitchP1.5 / P1.86 / P2 / P2.5 / P3
DiameterØ300 to Ø1,200 mm standard (larger on drawing)
HeightBuilt in 500 mm bands, up to 6 m per column
Resolution exampleØ800 mm at P2.5 → 1,005 × height-dependent px
Brightness≥600 nits indoor
Refresh3,840 Hz
Module structureDriver on board, front service
Viewing angle140° H / 140° V
Max power800 W/m²
IP ratingIP43 indoor, IP65 on request
ControlNovastar / Colorlight
Warranty3 years
Application

Where this one works

Same build, different mounting and content depending on the venue. Tell us the site and we adjust the structure and the pixel map.

Shopping centre structural column
Hotel lobby drum
Stage and set design
Product launch plinth
FAQ

Practical questions

How is a non-standard shape priced?
By the number of module types it needs. A shape that can be built from six module types is far cheaper than one that needs forty, even when they cover the same area. We tell you the count before we quote.
Can the artwork be mapped properly onto the shape?
Yes, and the mapping project is part of the delivery. For most shapes that means a 2:1 or cylindrical unwrap; for compound forms we supply a baked UV map so your content team works in a normal video timeline.
Also in this line

Shaped LED Display

Line overview
Indoor LED Cube Display — Four to Six Faces
CUB-P2.5-1000

LED Cube Display — Four to Six Faces

Four to six faces of LED on a right-angled carcass, mapped as one canvas so content runs around the corners instead of restarting at each face.

  • 500 / 1,000 / 1,500 mm edge
  • ≥600 nits indoor, ≥5,500 nits outdoor
  • 3,840 Hz
View specifications
Made to drawing

Other shaped builds

Any diameter, outline or pitch quoted from your own file. Tooling shown as a separate line so you can see what the shape costs.

Request a quote

Need this in a different size?

Every model on this page is a starting point. Give us the diameter or outline you actually need and we will quote the build.