The plaza had no shelter
The site is a public square about 60 m from open water. Design wind speed for the region works out to roughly 0.65 kN/m² on a vertical surface, and a petal is not a vertical surface — it is an inclined plate that catches wind on both faces depending on direction.
The first structural drawing treated each petal as a flat panel at 15 degrees from vertical and arrived at a total overturning moment that the proposed base could not hold. The fix was not a bigger base; it was a smaller petal. We reduced the span from 6.4 m to 5.5 m, which cut the sail area by 26% and brought the moment back inside what a 3.2 m square foundation could resist without piling.
Reducing the size made the object better, incidentally. At 6.4 m the petals overlapped the central stem and the flower read as a blob from the road. At 5.5 m there is a gap between petals and you can see the structure, which is the whole point of a sculpture.
Six cabinets that are not rectangles
Each petal is a closed shape with a curved outer edge and a pointed root where it meets the stem. There is no way to tile that with standard modules, so each petal is built from a lattice of cut cabinets: 27 in total across the six petals, with the edge cabinets trimmed to the petal outline.
The trimming is done on a CNC after the frame is welded, not before. Cut first and weld second, and the weld draws the edge out of tolerance by 2 to 3 mm, which on a 5.5 m petal is a visible step between adjacent petals. We learned that on an earlier job and it is now in the drawing notes.
The screen face is P3, which at 32 m² gives 3.56 million lit pixels. Outdoors, at the viewing distance from the plaza edge — about 12 m — P3 is more resolution than the eye can use. P4 would have been fine and 30% cheaper. The client wanted P3 because they intend to photograph it, and photographs resolve more than eyes do.

Where the water goes
An outdoor sculpture is a rain machine. Water lands on the petal faces, runs to the root, and if there is no path it sits in the bottom row of modules until it finds the connector. Every petal here has a 3 mm drainage channel machined into the root edge, behind the face, leading to a weep hole at the lowest point of the cabinet group.
All cabinets are IP65 on the face and IP54 on the back, which is the honest split: the face has to survive a pressure washer, the back only has to survive weather. Sealing the back to IP65 costs about 8% more and traps heat, and heat is what kills an outdoor screen in year four, not water.
The power and data entries are all at the root, inside the stem, above the drainage line. Nothing enters a petal from the underside. That one rule has saved more outdoor installations than any coating we have ever specified.
Building it in a live square
The plaza is used every evening. The foundation went in during a two-week closure agreed with the city, and everything after that was night work with the square reopened at 07:00.
The stem and the first two petals went up as one assembly — 1.4 t, lifted in one go on a 50 t crane at 03:00 with the road closed for 40 minutes. The remaining four petals went on individually over six nights. Each petal is bolted to the stem through a flange with 12 M16 bolts, torqued in a star pattern, and checked again after 72 hours because the whole assembly moves as it takes load.
Total steel is 2.1 t including the base plate and the internal ribs. The base is a 3.2 m square raft, 600 mm deep, with a 40 mm grout gap that lets us re-level the whole sculpture if the plaza settles. It has settled 6 mm in two years, and we have not had to touch it.
What we would change
We would ask for the wind report before the render. The render was signed off, the client loved it, and then the structural calculation came back and we had to shrink it. That conversation is much easier in week one than in week six.
The other thing is maintenance access. The petals above 5 m can only be reached from a boom lift, and the plaza has a tree line that stops a lift getting closer than 8 m to the sculpture. Servicing a module at the top of the upper petal means a 12 m boom at full extension, which is a permit and a road closure. We should have put a fixed ladder inside the stem and an access hatch at each petal root. That is now standard on anything over 6 m, and this project is why.

